Friday, September 10, 2004

Is That a Real Virus Alert?

Something that I have to consider from time to time - both in my role as a consultant, and as a trainer - is whether or not I'm assuming something is 'common knowledge' for my students or clients, when it isn't. Experts often forget what a beginner, or just a non-expert, doesn't know. I was reminded of this during a phone conversation with a client last week.

I was a bit confused at first (and so was she) because her screen had both a spyware popup, made to look like a Windows alert - claiming "You have been infected with spyware!" (no kidding) - and a genuine alert from her antivirus software (because the spyware had just attempted to install a trojan.)

It struck me that one of the reasons that the fake spyware alerts are effective at fooling the average computer user is that they may not be sure what a genuine alert from their antivirus software looks like! Especially in a business environment, the end user may not have installed the software themselves, and quite possibly couldn't tell you which software is installed - or where to find the controls.

HOW DO YOU GENERATE A VIRUS WARNING without actually loading a virus on the computer? By using a file that the antivirus software vendors have generally agreed to treat as a virus, even though it isn't. The folks at EICAR (European Institute for Computer Anti-Virus Research) have a collection of files available to test your software. Try it yourself, and if you support a network, use it to educate your users!

(I know the EICAR test file is detected by Trend, Symantec, McAfee, Panda, and Kaspersky antivirus software. If your software doesn't detect the file as a virus, you might want to verify that your 'real time protection' is active. You do have antivirus software, don't you?)

Don't make the mistake of thinking someone's an idiot for clicking on a spyware popup if you've never showed them what a real virus warning looks like.

Training matters.

Thursday, September 09, 2004

Don't Click That!

I recently had to clean up a client computer that was infected with spyware. Or if you prefer, malware. I like crapware, personally.

As this problem has mushroomed, and many of the web sites and programs involved have started behaving - for all practical purposes - just like computer viruses, I have been amazed that:

  • No one has brought a class-action lawsuit against the proprietors of these web sites - or their sponsors.

  • Most popular anti-virus programs have, until very recently, refused to identify and remove the software and browser modifications, resulting in a new class of spyware removal products such as Spybot Search & Destroy, Ad-Aware, and PestPatrol (which was recently purchased by CA, and so will probably show up in the next version of their eTrust anti-virus software.)
On the infected computer, the user's home page had been set to www.passthison.con/r4/?s43.

(Many of the URLs in this post are not clickable, and have been slightly mangled as well. If you feel compelled to fix the links and open them, I strongly recommend that you don't open them in Internet Explorer on Windows - unless you are very confident in your popup blocker, your antivirus software, and your spyware removal software - and are also sure that your Windows service pack and security updates are absolutely current. Don't blame me if you fill your computer up with crap!)

The 'Passthison' web site apparently used to pass itself off as "A collection of the greatest fun sites to pass on to your friends." It was featured on the BBC's Essex Web Site of the Day, and on quite a few 'Cool Links' and 'My Favorites' web pages.

A quick Google search, however, also turned up several 'Passthison' removal tools and spyware discussions. There was apparently once even a Microsoft knowledge base "Q" article - Q309313 PassThisOn.com Home Page Unexpectedly Appears When You Start Your Computer - but it has since been removed.

The 'Passthison' site also features in a 'browser hijacking' complaint filed with the FTC by the CDT. (Good!)

And it turns out that the person behind 'Passthison' is none other than Sanford Wallace, the allegedly 'reformed' Spam King, who has also been involved in some litigation.

The current home page at www.passthison.con is just a text file, which reads:

"Due to new laws being enacted and controversy surrounding our business model, we have voluntarily decided to implement the cease of all current business practices by the end of June 2004."
Uh-huh. But the if you load the page (from the same site) that had hijacked my client's browser, it will:

  • Open three popup ads from adserver.con - with no toolbar, location bar, status bar, or close box. Nice.

  • Open a popup ad for Secret Keeper software, which promises it "will allow you to protect your privacy, clear your history, and block unethical websites from changing your homepage or spying on you with cookies." Do you suppose it will block the unethical website which changed your homepage to pop up this ad? I don't think so. No toolbar or close box on this one, either.

  • Open a page titled 'preexploit.htm' from a server at 209.50.251.182. Pre-exploit, get it? Subtle, they aren't. They also aren't kidding, because the page in question will attempt to exploit a flaw with Internet Explorer's handling of iframes, web archives and help files. Have a look in the directory - just don't click on anything! If they do manage to exploit your browser, they'll go on to inject trojan software and other assorted garbage onto your PC - at which point, your computer is under the control of the spammers, not you.
(While I was researching the exploit, I ran across an article titled "Follow the Bouncing Malware" on SANS - one of the best general Internet security sites. The author, Tom Liston, attempts to determine how an unpatched Windows XP Home computer could be compromised, and ends up discovering the exact same exploit on the exact same web server - and follows the ugly results farther than I did.)

But wait - there's more! There are also several popup ads from www.lovemynet.con, including one which features a schmaltzy "Friends Are Like Angels" poem, and encourages you to "Click HERE or click on the angel to send this special page to the people you want watched over..."

More like people you want taken over! Guess where that link will take you? Not-so-reformed Spam King Stanford Wallace's smartbotpro.not, where he'll be happy to harvest you and your friend's email addresses to use himself and sell to other spammers, and generate a few more popup ads, too.

As a final insult, the page generates one more popup, positions it way off the screen so that it's effectively invisible, and continues to generate more popups from that! If you can see the window, it claims:

"If your computer will NOT hide this big white window, you may have spyware on your system which is interfering with your ability to control hidden windows. Spyware also sends you unsolicited advertising, slows down your computer and could capture private information like credit card numbers and social security numbers, etc.

I recommend that you install a "spyware removal" program so you can rid your computer of these parasites."
(You almost have to admire the audacity. Perhaps this fellow will run for office the next time he 'quits' the spamming business.)

It then recommends www.spydeleter.con as a source for effective syware removal. It wouldn't surprise me if it does clean out all the other spyware - so that your machine can be completely controlled by theirs. I've seen trojan programs do the same thing.

SO WHAT'S THE SOLUTION? There isn't a simple one. If you lock down Internet Explorer in 'paranoid mode,' with scripting and other advanced features completely disabled, you'll be able to avoid a lot of these issues - but you'll also discover that quite a few popular web sites won't work properly. Several industry pundits have begun recommending Firefox as an alternative browser, and it does have a lot to recommend it - but it's not free of security issues either, and like it or not, most popular web sites are formatted to work best with Internet Explorer.

Keep as current as possible with Windows updates.
Even if you're completely up to date, you may still be vulnerable, but you will certainly be vulnerable if you don't apply the updates. This is probably the single most important thing you can do.

Install an Antivirus program, and make sure that its updates are working.
Some block spyware as well - I've seen good results from McAfee VirusScan, and Trend's PC-Cillin 2005 is in beta test until September 30th - you might be able to participate.

If your Antivirus program does not also block spyware, then use an anti-spyware program.
And make sure that it is updated regularly, as well.

Don't send people 'cute' e-cards from unfamiliar sites.
If it isn't Hallmark, or American Greetings, or anyone you've heard of, don't hand them you and your friend's email address, no matter how cute the little bunnies and angels are. If you have a friend or office mate who sends these things on a weekly basis, encourage them to stop. And to have their machine examined. And maybe their head, too.

Monday, September 06, 2004

Cheap Switches and Broadcast Storms

One of the continually amazing and wonderful things about computer technology is the continuing trend toward smaller, faster, cheaper.

For example, when Kalpana (which was purchased by Cisco in 1994) introduced the first Ethernet switches in 1990, they were huge - about the size of a PC - which, to be fair, was also true of the Cisco routers they would challenge at the core of the LAN.

They were slow - half-duplex 10 Megabit Ethernet - although again, this was the best available at the time.

And the first seven-port model retailed for $10,500, or $1,500 per Ethernet port - still cheaper than a router, which might be three times that cost.

[These figures come from Network Computing magazine, which ranked the Kalpana EtherSwitch as the 5th "Most Important Product of the Decade" in October of 2000.]

Today, I can purchase a D-Link, Linksys, or Netgear eight-port full-duplex 100 Megabit switch for about $40, and can just about put it in my pocket. I don't even have to go to a computer store - Office Depot has Ethernet switches. So does Wal-Mart. They'll probably be in the check-out lane at Kroger soon, next to the batteries and gum.

(I can also purchase an original Kalpana EtherSwitch on eBay right now for $15, plus shipping, if I really want one.)

The cheap switches are meant for home networks and small offices, but I see lots of them on, under, and behind the desktops at larger businesses. The reasons are fairly simple - offices (and cubicles) which may have started with one occupant now hold two; the desktop PCs are now often joined by a laptop, and occasionally a networked printer (and a VoIP telephone is next!) - and when a new cable run to the wiring closet or server room might cost $50-$150 and require an expensive core switch upgrade (because all the ports are full!) it seems like a no-brainer to throw a $40 switch into each office.

And it generally is a good solution, but there is a potential problem, which one of my clients recently found out the hard way.

The small, cheap switches are unmanaged, which appeals to their target market. There's nothing to figure out - you plug them in and they work. But since they lack the capability for management, they also lack features which might require configuration, such as Spanning Tree Protocol - which we'll return to in a moment.


I GOT A CALL after lunchtime on a Friday, from a colleague's cell phone - asking if I knew a store in town that was likely to have a couple of 24-port switches in stock. The client's switches - a pair of Cisco Catalyst 2900s - were 'going crazy.' No one could connect to anything; the port status lights were all blinking rapidly, and even after turning the switches off, the problem came right back after just a couple of minutes of operation.

I thought it was highly unlikely that both switches had malfunctioned at the same time, and in any case I wanted to see what was happening (I had originally installed the switches myself) so I told him to skip the store and pick me up, and I grabbed a couple of Catalyst switches from my lab.

Sure enough, the switches were blinking like crazy, but a quick look at the settings and status didn't indicate anything obviously wrong. In the interest of getting the client's network back online while we did forensics on the switches, we plugged in the spares from my lab and moved about forty patch cables from the old switches to mine.

The problem cleared up, everyone started getting back to work - and then my switches went crazy. Since the status lights indicated constant traffic on every port, I figured that any port might give me some clue as to what was going on. Using Microsoft Network Monitor on one of the servers, I captured network traffic for several seconds.

I found hundreds of frames, all from the same MAC address, each a NetBIOS broadcast request for a Master Browser. A Windows client was attempting to build a list of network resources. But Windows clients don't normally broadcast hundreds of NetBIOS requests per second. And I had trouble believing that any of the client machines could even continuously transmit at the rate I was observing.

I queried the switches to determine the source port for that MAC address (the Catalyst switches are managed) and we tracked the source to a computer in shipping, which was connected to a small switch. We disconnected the computer, and the network settled down. I thought perhaps it had a malfunctioning network card; less likely but still possible was a virus or other malware (especially since this machine had recently been configured by FedEx.)

And then the network went down again.

A quick check back at the Catalysts showed that yes, it was the same problem, and the traffic was still originating from the same port. We had another look at the switch, and found that there were five patch cables, even though we had only found three computers in shipping. We followed one cable behind a bench, and shelves, and a stack of boxes, and then back to a different port on the same small switch! Aha! We unplugged the cable, and the problems went away - this time for good.

What my client had been experiencing was a classic broadcast storm, which occurs when an Ethernet network has been configured with a loop.

Data is sent through an Ethernet network in small packages called frames, which, much like a letter, have a destination address, a source address, and a payload, or data. The addresses are media access control, or MAC addresses, and are unique to each network interface card, or NIC.

Switches use the source addresses to determine the location of each computer, printer, and other network device on the network. Frames with a specific source address will only enter one port (plug) on the switch. Once a switch has mapped a MAC address to a specific port, then frames with that address as the destination address will only be sent to that port.

(This is what distinguishes a switch from a hub. Hubs do not build a map of MAC addresses, and simply send an incoming signal out of every other port.)

But frames sometimes have a broadcast address as the destination - which is a special address intended for every NIC. Computers use this address when a message must be sent to all other computers - or when the destination MAC address is unknown.

(Consider a license plate number, which uniquely identifies a car. If you see a parked car with its lights left on, you might have the license number announced over the intercom. Everyone will hear the announcement (broadcast) but only the owner of the car needs to take action. Everyone else will ignore the announcement once they realize that the number isn't theirs.)

Because a broadcast frame is meant for every computer, a switch will send the frame out of every port (except for the port where it entered the switch.)

But if there is a loop in the network, a broadcast frame leaving one switch port will enter through another, and the switch will once again send that same frame out of every port except the one it entered. In the case of my client, the loop was on a single switch. When any of the computers on that switch sent a broadcast, the switch would send the frame out of both looped ports - and almost instantaneously, it would appear inbound on the same two ports after going around the loop. The switch would once again send the frames out of every other port, including the other port in the loop, and the switch would become a perpetual-motion frame generator, constructing new broadcast frames as fast as it could process them.

And since one of the ports on the switch led to the rest of the network, the whole network was flooded with an endless stream of broadcast frames. There was essentially no room left on the wire for any other machine to talk, so the network came to a standstill.*


SPANNING TREE PROTOCOL is designed to prevent loops in a switched network. All the interconnected switches in a network select one switch as a root bridge - based on the MAC address of the switch, and the switch's bridge priority number.

(The bridge priority needs to be adjustable - the bridge with the lowest priority will become the root. Otherwise the root bridge would be determined just by the MAC addresses, which would be something like choosing a leader based on who had the lowest Social Security number. This is why only managed switches typically implement spanning tree.)

All the switches then determine which of their ports (based on link speed and 'hops') has the lowest cost path to the root bridge. The switches do this by sending bridge protocol data units, or BPDUs, from each port - containing their own priority number, their current root bridge, and their lowest cost path to the root bridge. While each switch begins with itself as root, it will learn from the incoming BPDUs, until all the switches converge on a single choice for the root bridge, and have determined their own lowest cost path to that root.

If a switch determines that there is more than one path to the root, it will disable (block) the higher cost ports. If two or more ports have the same cost, then the port with the lowest number will be the active port, and the others will be blocked. Blocking ports will never transmit any frames, but will still listen to incoming BPDUs, in order to respond to changes in the network.

In this way, spanning tree is able to detect loops in the network, and shut down one of the looped ports. For a simple loop, such as the one at my client, the switch will notice that the incoming BPDUs have its own MAC address, and will disable the higher-numbered port.


OF COURSE, THERE'S ALWAYS A CATCH. Spanning tree can take 30 seconds to converge after any change, which means that it might be 30 seconds before any new computer plugged into the network begins working. If the computer is configured to get an IP address automatically using DHCP, it may give up in those 30 seconds - and not try again for five minutes. In the mean time, of course, the computer won't be able to use the network, and a non-technical user might reasonably conclude that something's broken. Cheap, consumer-oriented switches are designed to start working as soon as a new device is plugged in, which means no spanning tree.

And managed switches naturally are more expensive - sometimes by several hundred dollars over unmanaged versions. Many manufacturers don't offer managed switches with fewer than twelve or even 24 ports.


IF YOU'RE GOING TO HAVE THESE THINGS on your network, you need to make sure that all your users understand that loops are big trouble. In the case of my client, an employee had made an effort to clean up the shipping area, and when they discovered an unplugged network cable, intended for temporary use by laptops, they chose to 'clean it up' by plugging it into the switch - right next to its other end! Ouch. The LAN network was unusable for most of that Friday, idling more than a dozen salespeople in that office, and even more in Austin and Dallas who connect via VPNs. The direct cost in consulting fees to diagnose the problem was substantial, but the cost in lost sales and lost employee productivity was much greater. You can be sure that the management had a long talk with the person responsible.

Once a network reaches a certain size (and degree of complexity) you should implement a policy that no employee is allowed to plug anything into the network without the approval of the network support personnel. This can, of course, occasionally inconvenience an employee - or a visitor with a laptop - but when an innocent mistake can potentially bring down the entire network, the consequences are too great to ignore.

Other common problems are wireless access points - which can provide a path into the core of your network, bypassing your firewall - and laptops running Windows XP with both a wireless and Ethernet adapter. It's not uncommon for XP with multiple adapters to be configured for bridging, which means that, yup - it's implementing spanning tree, and can cause interesting behavior by forcing the network to re-converge when it's plugged in. It's a bad thing when a visitor's laptop becomes the root bridge.

Know what's plugged in to your network, and only allow authorized people to make changes.

* My more technically aware readers will have observed that normally, plugging a cable back into the same switch (or another switch) will not cause a problem unless the cable is wired as a crossover cable. But because the cheap switches are designed to be consumer-friendly, they will 'helpfully' automatically change to crossover mode!

"Each port on the DSS-5+ supports automatic MDI/MDIX detection providing true 'plug and play' capability without the need for confusing crossover cables or crossover ports."

- from the product description on a 5-port D-Link switch


Welcome!

"Arguments, agreements, advice, answers,
Articulate announcements
It's only talk"

Elephant Talk, King Crimson


Welcome students, clients and colleagues; friends and visitors! I intend this blog to be a resource for networking technology and general computer topics, plus whatever else happens to occur to me as it evolves.

I work as a computer consultant, concentrating on Microsoft Exchange, Active Directory design and migrations; Cisco switching, routing, firewall and VPN infrastructure; and security for small and medium-sized networks. I also deliver training on Microsoft and Cisco technology.

I hope you find something that captures your interest - if only for a moment!